P6011 Smart Pressure Transmitter with High Accuracy & Digital Output
P6011 Smart Pressure Transmitter with High Accuracy & Digital Output
The P6011 Smart Pressure Transmitter is a high-accuracy, high-stability pressure measurement solution independently designed and manufactured by PurideSensor. Equipped with an isolated diaphragm silicon piezoresistive pressure sensor, the transmitter provides excellent interference resistance and reliable surge protection. Digital compensation, nonlinear correction, and signal amplification technologies ensure accurate, stable, and reliable pressure measurement. The integrated design delivers standard industrial signal output, making the P6011 ideal for industrial pressure measurement, process monitoring, and automation control applications.
Features
-
Digital Compensation and Nonlinearity Correction
-
RS485 interface (Modbus-RTU protocol)
-
Supports Networked Applications
-
High Accuracy and High Reliability
-
Available in gauge, absolute, and sealed-gauge versions (specify when ordering).
Applications
-
Petrochemical Industry
-
Process measurement and control (PLC/DCS integration)
-
Hydraulic and Pneumatic Systems
-
Water Conservancy and Hydropower
|
Measurement range |
-1bar...0~0.1bar…1000bar |
|
Overpressure |
≤2 times FS or 1100bar (minimum value is valid) |
|
Accuracy |
±0.1%FS, ±0.25%FS, ±0.5%FS |
|
Long-term stability |
≤ ±0.15% FS/year |
|
Compensated temperature range |
−10 to +70 °C |
|
Ambient temperature |
−30 to +80 °C |
|
Storage temperature |
−40 to +80 °C |
|
Output signal |
【4–20 mA (2-wire, loop-powered)】 or 【RS485 with Modbus-RTU protocol】, selectable; baud rate 【9600–115200 bps】 |
|
Supply voltage |
4–20 mA: 【12–36 VDC】, 24 VDC nominal; RS485: 【12–36 VDC】 |
|
Load resistance |
【≤ 600 Ω at 24 VDC】 (4–20 mA) |
|
Electrical connection |
DIN EN 175301-803 (DIN 43650) Form A / Hirschmann connector; M12 circular connector; direct cable outlet |
|
Ingress protection |
IP65 (DIN 43650 connector); 【IP67】 (M12); 【IP67 / IP68】 (direct cable outlet) |
|
Wetted parts |
Diaphragm 316L stainless steel; process connection 【316L】 |
|
Housing material |
304 stainless steel |
|
Seal material |
FKM, 【−20 °C】 min. (standard); EPDM, 【−40 °C】 min. (optional, water/steam service) |
|
Fill fluid |
Silicone oil |
|
Vibration |
【20 g】, 【10–2000 Hz】, sinusoidal, 【2 h per axis】 (IEC 60068-2-6) |
|
Shock |
【50 g】, 【6 ms】, half-sine, 【6 directions × 3 times】 (IEC 60068-2-27) |
|
Insulation resistance |
≥ 100 MΩ at 500 VDC (terminals to housing) |
Outline Construction
Electrical Connection
Ordering information — P6011 pressure transmitter
|
P6011 |
Pressure Transmitter |
|||||||
|
|
code |
Range |
||||||
|
[0~Xbar] |
-1bar...0~0.1bar…1000bar |
|||||||
|
|
code |
Pressure Type |
||||||
|
G |
Gauge pressure |
|||||||
|
A |
Absolute pressure |
|||||||
|
S |
Sealed gauge pressure |
|||||||
|
|
code |
Accuracy |
||||||
|
10 |
0.1%FS |
|||||||
|
25 |
0.25% |
|||||||
|
(blank) |
0.5% |
|||||||
|
|
code |
Output Signal |
||||||
|
R |
RS485 |
|||||||
|
|
code |
Supply Voltage |
||||||
|
(blank) |
|
|||||||
|
|
code |
Electrical Connection |
||||||
|
B1 |
Hirschmann connector |
|||||||
|
B2 |
Cable outlet, IP65 |
|||||||
|
B3 |
Cable outlet, IP68 |
|||||||
|
B4 |
M12 connector |
|||||||
|
|
code |
Process Thread |
||||||
|
C1 |
M20×1.5 male thread, flush diaphragm |
|||||||
|
C2 |
M20×1.5 male thread, with sealing washer groove |
|||||||
|
C3 |
G1/2 male thread |
|||||||
|
C4 |
G1/4 male thread |
|||||||
|
P6011 |
[0~10kPa] |
G |
|
E |
|
B1 |
C1 |
complete specification |
Notes
- Seal material and temperature — With FKM (fluoroelastomer) seals, the minimum medium temperature is −20 °C; with EPDM (ethylene propylene diene monomer) seals, the minimum medium temperature is −40 °C. EPDM is not suitable for mineral-oil-based media — for low-temperature oil applications, please confirm medium compatibility with us.
- Certificates and special requirements — A calibration certificate is available on request. If you need a calibration certificate or have any other special requirements, please contact us in advance and state them in your order.
| Brand Name: | Puride |
| Model Number: | P6011 |
| MOQ: | 1piece |
| Price: | Price on request |
| Payment Terms: | L/C,T/T |
| Supply Ability: | 5,000 sets / month |
